JL Audio MX500 4 4-Ch. Class D Full-Range Marine Amplifier Supply

Description
Summary
Overview
Overview
Engineered specifically for powersports applications, the 4-channel MX500 4 amplifier employs the high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500 4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.
Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
Â
Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω
70 W RMS x 4
@ 2 Ω
125 W RMS x 4
Bridged @ 4Ω
250 W RMS x 2
Â
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω
55 W RMS x 4
@ 2 Ω
90 W RMS x 4
Bridged @ 4Ω
180 W RMS x 2
Â
General Specifications
Frequency Response
20 Hz – 20 kHz (+0, -1dB)
S N Ratio, referred to highest rated power
>88 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S N Ratio, referred to 1 W
>70.5 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 4 Ω
>92 50 Hz
Damping Factor @ 2 Ω
>43 50 Hz
THD+N @ Rated Power
<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs
Switchable from 250 mV – 4 V RMS (Low) to 750 mV – 15 V RMS (High)
Min.Copper Power Ground Wire Gauge
4 AWG wire
Fuse Rating
50 A (AFS, AGU or MaxiFuseâ„¢)
Â
Signal Processing
Filter Mode(s)
Low-Pass or High-Pass
Filter Slope(s)
12 dB octave
Filter Frequency Range
35 Hz – 300 Hz
Detented, Calibrated Filter Freq. Potentiometers
Yes
Filter Defeat Function
Yes
Remote Level Control
No
Remote Level Modes
N A
Channel Input Mode Switch
Yes (2 3 4 ch.)
Pass-Through Preamp Output
None
Source Channel Selection for PreOuts
N A
Â
Physical Specifications
Height (H)
1.77 in 45 mm
Width (W)
9.33 in 237 mm
Depth (D)
4.50 in 115 mm
Additional Information
Title
Default Title
lifeoceanus.shop © 2025 All Rights Reserved
-
-
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
@ 4 Ω | 70 W RMS x 4 | ||
@ 2 Ω | 125 W RMS x 4 | ||
Bridged @ 4Ω | 250 W RMS x 2 | ||
@ 4 Ω | 55 W RMS x 4 | ||
@ 2 Ω | 90 W RMS x 4 | ||
Bridged @ 4Ω | 180 W RMS x 2 | ||
Frequency Response | 20 Hz – 20 kHz (+0, -1dB) | ||
S N Ratio, referred to highest rated power | >88 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth) | ||
S N Ratio, referred to 1 W | >70.5 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth) | ||
Damping Factor @ 4 Ω | >92 50 Hz | ||
Damping Factor @ 2 Ω | >43 50 Hz | ||
THD+N @ Rated Power | <1% @ 2 Ω per Ch. | ||
Input Voltage Range @ RCA Inputs | Switchable from 250 mV – 4 V RMS (Low) to 750 mV – 15 V RMS (High) | ||
Min.Copper Power Ground Wire Gauge | 4 AWG wire | ||
Fuse Rating | 50 A (AFS, AGU or MaxiFuseâ„¢) | ||
Filter Mode(s) | Low-Pass or High-Pass | ||
Filter Slope(s) | 12 dB octave | ||
Filter Frequency Range | 35 Hz – 300 Hz | ||
Detented, Calibrated Filter Freq. Potentiometers | Yes | ||
Filter Defeat Function | Yes | ||
Remote Level Control | No | ||
Remote Level Modes | N A | ||
Channel Input Mode Switch | Yes (2 3 4 ch.) | ||
Pass-Through Preamp Output | None | ||
Source Channel Selection for PreOuts | N A | ||
Height (H) | 1.77 in 45 mm | ||
Width (W) | 9.33 in 237 mm | ||
Depth (D) | 4.50 in 115 mm | ||
Title | Default Title |
---|
lifeoceanus.shop © 2025 All Rights Reserved
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart