-70%
Kenwood KACM8005 Class D 5-Channel Marine Power Amplifier Sale
Original price was: $579.00.$173.70Current price is: $173.70.
27 people are viewing this right now

Guaranteed safe & secure checkout
Description
Additional Information
Questions
Description
Summary
50W x 4 + 300W (4Ω)
75W x 4 + 500W (2Ω)
150W x 2 (Bridged) + 300W (4Ω)
Conformal Coating*
Speaker Level Input
Signal Sensing Turn-on
Variable Low & High-pass Filter
Bass Boost
(W)9” x (H)2-3 16” x (D)7-3 8”
* Conformal Coating: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
* Conformal Coating: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Overview
Overview
CEA-2006 Primary Ratings
| Power Output
|
| 50 Watts RMS x 4 + 300 Watts RMS x 1 | at 4 Ohms and ≤1%THD+N
| Signal-to-Noise Ratio
|
| 80dBA (Reference: 1Watt into 4Ohms)
|
|
| Maximum Power Output
| MAX POWER
|
| 1600W
|
|
| Rated Power Output at 14.4V
| A B (4 Ohms)
|
| 50Watts RMS x 4 (4 Ohms, 20-20kHz, ≤1.0% THD)
|
| A B (2 Ohms)
|
| 75Watts RMS x 4 (2 Ohms, 1kHz, ≤1.0% THD)
|
| SUB (4 Ohms)
|
| 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤0.5% THD)
|
| SUB (2 Ohms)
|
| 500Watts RMS x 1 (2 Ohms, 100Hz, ≤0.5% THD)
|
| A B (Bridged 4Ohms)
|
| 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, ≤1.0% THD)
|
|
| Specifications
| Signal to Noise Ratio
|
| 100dB (Reference: Rated Power into 4Ohms at 14.4V)
|
| Frequency Response
|
| 20Hz-50kHz (+0dB, -3dB) A B | 20Hz-200Hz (+0dB, -3dB) SUB
| Input Impedance
|
| 10k ohm
|
| Speaker Impedance
|
| 4Ω (2Ω to 8Ω allowable)
|
| Bridged Connection
|
| 4Ω to 8Ω allowable
|
|
| Audio Section
| Low-Pass Filter
|
| 50Hz-200Hz, -24dB oct (SUB)
|
| High-Pass Filter
|
| 50Hz-200Hz, -12dB oct (A B)
|
| Bass Boost
|
| 40Hz, 0dB – +18dB (SUB)
|
| RCA Input Sensitivity
|
| 0.2[V] – 5.0 [V]
|
| Speaker Level Input Sensitivity
|
| 4.0[V] – 12.0 [V]
|
|
| Terminals
| Battery & Ground
|
| M6 Screw Type Terminal Block
|
| Speaker Output
|
| M4 Screw Type Terminal Block
|
|
| General
| Dimensions(WxHxD)
|
| 9 x 2-3 16 x 7-3 8 [inch]
|
| Operating Voltage
|
| 14.4V(11-16V allowable)
|
| Current Consumption
|
| 58[A]
|
|
| Key Features
| CEA-2006 Compliant | 2 Ohms Load Capability Speaker Level Input with Signal Sensing Turn-on Power MOS-FET Switching Power Supply Extruded Aluminum Heat Sink Design A B Sub Independent Gain Adjustment
|
lifeoceanus.shop © 2025 All Rights Reserved
|
---|